3rd channel servo mount for the Baja 5B & 5T (Baja Skunkworks)

This is something that was developed a couple years ago, and we finally had some time to bring it to fruition. This is a third channel servo mount. It is specifically designed for use with front brakes giving you the ultimate setup for racing. However you can use it for whatever option you can come up with for your baja.

This mount will work with both the 5T and the 5B. On the 5B you will need to trim the body back some.

The servo mount is adjustable so that it will work with most any of the standard sized servos out there. Also, the bracket has two servo mounting configurations depending on your setup

This will clear most side mount pipes. However you may need to modify the pipe mounts. I know on the DDM sidemount you need to trim the back mid pipe bracket

The bracket is a 1/4″ thick and doubles as an HD motor chassis bracket.

These are shipping out to TGN and DDM this week. MSRP is $50 and includes servo mounting hardware

Here is the mount with a Jetpro Pipe on my 5T