Building a Baja Diff with the Turtle Racing Diff saver and Fast Eddy Bearings
January 28, 2009 by Baja Planet
Filed under Tutorials
This tutorial shows you how to convert your existing diff (RTR or SS) to us a Turtle Racing Diff Saver and installing the reinforced drive cups. It also shows the placement of the diff bushing to bearing upgrade using FastEddy bearings.
There are 3 SS parts compatibility issues using the SS Parts if you are doing a direct swap with an existing SS Diff.
All but one is included in the TR diff saver kit.
1- Need RTR washers on the inside of the diff. Need to get (1 set) HPI 87461
2- Need to use the RTR diff half gasket that comes with the TR diff saver. (The SS case gasket is larger)
3- Need to use the 4 case screws that come with The TR Diff saver. (SS screws are shorter.)