Building a Baja Diff with the Turtle Racing Diff saver and Fast Eddy Bearings

This tutorial shows you how to convert your existing diff (RTR or SS) to us a Turtle Racing Diff Saver and installing the reinforced drive cups. It also shows the placement of the diff bushing to bearing upgrade using FastEddy bearings.

There are 3 SS parts compatibility issues using the SS Parts if you are doing a direct swap with an existing SS Diff.
All but one is included in the TR diff saver kit.

1- Need RTR washers on the inside of the diff. Need to get (1 set) HPI 87461
2- Need to use the RTR diff half gasket that comes with the TR diff saver. (The SS case gasket is larger)
3- Need to use the 4 case screws that come with The TR Diff saver. (SS screws are shorter.)